Ideal Burner Hood Imax Xtra 174411

The Ideal 174411 is a burner hood supplied for Ideal Commercial gas boilers. It sits over the burner assembly and shapes the way the flame and combustion products are directed into the heat exchanger, so the burner runs with a stable, even flame pattern.

It is a serviceable combustion component rather than a wear item, and it is listed for the Ideal Commercial Imax Xtra range. Because it forms part of the combustion path, it should be handled and refitted with care during any burner strip-down.

• Soot or heavy carbon deposits building up on the hood surface
• Distortion, cracking or heat damage visible on the hood
• Unstable or uneven flame pattern at the burner
• Combustion readings drifting outside the expected range after service
• Repeated lockouts or flame-failure faults traced to the burner area

• Confirm the boiler model and, where shown on the data badge, the GC number against the compatibility list.
• Check the existing part number on the component and compare it with 174411 and the alternative number 1780664.
• Inspect the burner gasket and seals while the burner is removed, and renew them if they are compressed or damaged.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.