Ideal Burner Assembly Imax Xtra F240-F480 174409

The Ideal 174409 is a burner assembly used in Ideal Commercial Imax Xtra appliances. It carries the gas and air mixture to the burner head, where combustion takes place inside the heat exchanger, so its condition directly affects ignition, flame stability and combustion readings. The assembly is listed for the Imax Xtra F240-F480 range and is also identified by the alternative number 1781044.

• Repeated lockouts or flame failure on start-up, with the burner failing to establish a stable flame.
• Visible distortion, cracking, corrosion or blocked ports on the burner head or body.
• Sooting, discolouration or a yellow, lazy flame instead of a clean blue flame.
• Poor or drifting combustion readings that cannot be corrected by servicing and adjustment.
• Unusual noise or rough light-up at the burner during ignition.

• Confirm the appliance model and, where available, the GC number against the compatibility list before ordering.
• Check the existing part against the alternative number 1781044 to make sure the correct assembly is being replaced.
• Inspect the burner gasket, seal or mounting hardware at the same time and replace anything that is compressed, brittle or damaged.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.