Ideal Burner Cable 4 Way 4m 173329

The Ideal burner cable is a 4-way lead measuring 4 m, supplied under part number 173329. It forms the electrical link between the burner assembly and the appliance control board, carrying the ignition and flame sensing connections. The lead is used on Ideal Commercial appliances and is supplied as a replacement for the original cable. The 4-way configuration means four conductors terminate at the burner end, matching the original wiring layout so the replacement follows the same routing through the appliance.

• The burner fails to light, or lights intermittently on demand.
• Ignition spark is present at the control board but does not reach the burner.
• Flame detection faults or lockout occurring shortly after ignition.
• Cracked, brittle or heat-damaged insulation along the lead.
• Loose, corroded or discoloured terminals at the burner or control end.

• Confirm the appliance model and serial number against the compatibility list before ordering.
• Check the existing lead for the alternative number 1179382 to confirm it matches this item.
• Inspect the burner gasket and electrode seals while the appliance is open and replace them if worn.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.