Ideal
Ideal Lipring Seal 100mm 172706
Ideal 100mm lipring seal, part 172706, for Ideal Commercial appliances; a 100mm circular lip seal supplied under reference ART.NR.27173.
At a glance
- Part type: Lipring seal
- Appliance family: Ideal Commercial
- Also known as 27173
£7.79
£6.49 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Ideal 100mm lipring seal, part number 172706, is a circular lip-type sealing component used in Ideal Commercial appliances. It is listed by the manufacturer under the reference ART.NR.27173 and is sized at 100mm across the seal.
A lipring seal sits in the appliance where a joint or shaft passes through a housing, with the flexible lip pressing against the mating surface to hold back water or gas at that point. Over time the lip hardens, flattens or splits, and the seal stops doing its job.
Signs this part needs replacing
- Water weeping or tracking from the joint the seal sits in
- Visible hardening, cracking or flattening of the seal lip
- The lip has lost its spring and no longer contacts the mating surface evenly
- Discolouration or swelling of the seal material after long service
- Recurring leaks at the same point after the joint has been re-tightened
Before you order
- Confirm the appliance model and the part number 172706 against the compatibility list below
- Check the seal diameter is 100mm, as listed for this part
- Note the manufacturer reference ART.NR.27173 when cross-checking against the appliance documentation
- If the joint uses additional gaskets or seals, check whether those are also required for the repair
Mechanical
| Part type | Lipring seal |
|---|---|
| Appliance family | Ideal Commercial |
Compliance
| Manufacturer part number (MPN) | 172706 |
|---|---|
| Alternative numbers | 27173 |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| IDEAL COMMERCIAL IDEAL COMMERCIAL PARTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.