Ideal Burner Support 172240

The burner support is the mounting component that holds and locates the burner within the combustion chamber of an Ideal Commercial Concord appliance. It is manufactured by Ideal and supplied under part number 172240, with the earlier reference 8358-5567 still used in older documentation. Because it sits inside the combustion path, the support must hold the burner at the correct height and alignment so that the gas/air mixture burns cleanly across the full firing range.

• Unstable or lifting flame at the burner, with combustion readings drifting outside the expected range
• Sooting or discolouration around the burner area, suggesting the burner is no longer sitting square in the chamber
• Visible distortion, corrosion or cracking of the support where it contacts the burner
• Rattling or movement of the burner when the assembly is checked during a service
• Repeated lockout or ignition faults traced back to poor burner location

• Confirm the appliance model and serial number against the compatibility list, as Concord variants use different burner arrangements.
• Check the part number on the existing component: 8358-5567 is the earlier reference for this support.
• Assess whether the burner gasket or seal should be renewed at the same time as the support.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.