Ideal Burner Support 172237

The Ideal 172237 is a burner support used on Ideal Commercial Concord gas appliances. It carries and locates the burner assembly inside the combustion chamber, holding it square to the heat exchanger so the flame pattern stays stable across the firing range. Because it sits directly in the firing path, the support is exposed to continuous heat cycling and is replaced when it distorts, corrodes or stops holding the burner in its correct position. It is listed under Ideal part type burner support and carries the previous Ideal number 8358-5564.

• The burner no longer sits square or sits loosely in the combustion chamber
• Visible distortion, cracking, scaling or corrosion on the support
• Unstable flame, flame lift or flame roll-out at ignition
• Sooting around the burner or combustion readings drifting outside tolerance
• Repeated ignition lockouts after the burner has been removed and refitted

• Confirm the appliance model and serial number against the compatibility list before ordering.
• Check the support currently fitted against previous number 8358-5564, which this part carries in the Ideal numbering.
• Inspect the burner and any seals disturbed during removal, and replace them if they show heat damage.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.