Ideal
Ideal Flange 1 1/4 Inch Tapping 172231
Ideal 172231 1 1/4 inch flange with tapping, a commercial Concord spares component for ES260/H, ES300/H and ES340/H CPT models.
At a glance
- Part type: Flange with tapping
- Appliance family: Ideal Commercial Concord ES
- Also known as 1178614
£131.48
£109.57 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Ideal 172231 is a 1 1/4 inch flange with tapping, supplied as a spare for Ideal Commercial Concord appliances. It forms part of the pipework connection on the appliance, bolting or threading onto the mating face to provide a secure, sealed joint with an additional tapped port for a sensor, drain or secondary connection. The part carries the original equipment reference 9536-1003 and is used across the Concord ES range of commercial units.
Signs this part needs replacing
- Visible weeping or a steady drip at the flange face or the tapped connection
- Corrosion, pitting or scale build-up on the flange face preventing a clean seal
- Staining or water tracking around the joint on the appliance casing or pipework below
- Repeated loss of system pressure with no other obvious source
- Difficulty achieving a seal after reassembly, or a distorted or damaged flange face
Before you order
- Confirm the appliance model and serial number against the compatibility list before ordering, as the Concord ES range uses several similar flanges.
- Note the alternative part number 1178614 so the correct item can be cross-checked against any older documentation.
- Inspect the mating gasket or sealing face at the same time and renew it if it is compressed, hardened or damaged.
Mechanical
| Part type | Flange with tapping |
|---|---|
| Appliance family | Commercial Concord ES |
Compliance
| Manufacturer part number (MPN) | 172231 |
|---|---|
| Barcode / EAN | 5022141722318 |
| Commodity code | 7307 91 00 00 |
| Alternative numbers | 1178614 |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| IDEAL COMMERCIAL CONCORD ES260/H CPT P/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ES260/H CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ES300/H CPT P/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ES300/H CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ES340/H CPT P/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ES340/H CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ESi 260 CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ESi 300 CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ESi 340 CPT U/A | — | — | — | |
| IDEAL COMMERCIAL IDEAL COMMERCIAL PARTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
IDEAL COMMERCIAL appliance manual — CONCORD ES260/H CPT P/A, CONCORD ES260/H CPT U/A, CONCORD ES300/H CPT P/A, CONCORD ES300/H CPT U/A, CONCORD ES340/H CPT P/A, CONCORD ES340/H CPT U/A
manualmanualIDEAL COMMERCIAL appliance manual — CONCORD ESi 260 CPT U/A, CONCORD ESi 300 CPT U/A, CONCORD ESi 340 CPT U/A
manualNo technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.