Ideal Combustion Chamber Insulation Complete 172109

The Ideal 172109 is a complete combustion chamber insulation set for Ideal Commercial appliances. It lines the combustion chamber, holding heat inside the chamber so the burner area reaches and maintains correct operating temperature while the outer casing stays cooler. The insulation also protects surrounding metalwork from prolonged heat exposure.

This is a manufacturer-supplied insulation assembly for the Ideal Commercial Concord range, listed under part type INSULATIONS.

• Insulation board cracked, split or breaking up when the chamber is opened
• Material crumbling, flaking or shedding fibres into the combustion chamber
• Localised scorching, discolouration or heat damage on the casing or surrounding panels
• Combustion readings drifting or proving difficult to set after service
• Insulation sitting loose or out of position against the chamber walls

• Confirm the appliance model and serial number against the compatibility list before ordering, as Concord variants differ.
• Check the part number on the existing insulation or the appliance documentation against 172109, 1178494 and 8358-8796.
• Inspect chamber seals, gaskets and fastenings at the same time, as these are normally disturbed when the insulation is removed.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.