Ideal Base Frame Assembly Complete 172093

The Ideal 172093 is a complete base frame assembly for Ideal Commercial appliances. It forms the lower structural frame of the casing, carrying the weight of the boiler body and giving the casing panels a fixed mounting point at the base of the unit.

This is a casing assembly part rather than a gas-carrying component, and it is listed against the Ideal Commercial Concord range. It is supplied as a complete base frame, so the whole lower frame is renewed in one go rather than rebuilt from individual sections.

• Visible corrosion or heavy surface rust along the base frame, particularly where condensate or spillage has collected.
• Cracking, splitting or distortion of the frame, leaving casing panels loose or misaligned.
• The appliance no longer sits level or the base has dropped on one side.
• Fixing points or mounting holes have rotted through and no longer hold the casing securely.
• Water staining or scale build-up around the base indicating a long-standing leak above the frame.

• Confirm the appliance model and serial number against the compatibility list, as the base frame is specific to the Concord ES380/H and ESi 380 variants.
• Check the old part number on the frame or in the service history against 8358-8747 and 1178478 before ordering.
• Inspect the casing seals and any gaskets around the base while the frame is off, and renew them if they are perished.
• Allow for the weight of the appliance when the base is removed — the boiler body must be supported independently.