Ideal
Ideal Burner Plate Gasket 250 Sq 171782
Ideal 171782 burner plate gasket, 250 SQ, for Ideal Commercial appliances; seals the burner plate joint. Also referenced as GIN0008.
At a glance
- Part type: Burner plate gasket
- This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
£37.98
£31.65 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Ideal 171782 is a burner plate gasket rated at 250 SQ, produced for Ideal Commercial appliances. It fits between the burner plate and the appliance body, sealing that joint so the combustion path stays closed and air is drawn through the burner as intended. The same item is referenced on the supplier listing as GIN0008.
Gaskets of this type are consumable: heat cycling hardens and flattens the material over time, so a fresh one is normally fitted whenever the burner plate is disturbed.
Signs this part needs replacing
- The gasket is cracked, brittle or has flattened out where it seats
- Soot staining or dark streaks around the burner plate joint
- Combustion readings drifting from the values recorded at the last service
- An unstable or altered flame picture at the burner
- The gasket crumbles or splits when the burner plate is removed for cleaning
Before you order
- Confirm the appliance model and serial number against the compatibility list before ordering
- Have the appliance GC number to hand where one is shown on the data badge
- Inspect the burner plate and its fixings for distortion or corrosion while the gasket is off
- This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Mechanical
| Part type | Burner Plate Gasket |
|---|
Compliance
| Manufacturer part number (MPN) | 171782 |
|---|---|
| GPC classification | Household Boilers/Furnaces/Tank Water Heaters Replacement Parts/Accessories |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| IDEAL COMMERCIAL IDEAL COMMERCIAL PARTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.