Ideal Cable Channel 1800mm Right Hand 171222

The Ideal 171222 is a right-hand cable channel measuring 1800mm in length. It is a casing assembly component used to route, retain and protect the wiring that runs through the outer casing of Ideal Commercial appliances. The channel holds cables clear of hot surfaces and sharp metal edges, keeping the loom tidy and preventing chafe where it passes through the casing.

Because it is a long section, it is normally fitted as part of a casing strip-down or rebuild rather than as a standalone repair. The part is supplied under the Ideal part number 171222 and carries the alternative number 85558053.

• Cracks, splits or deformation along the length of the channel
• Cables sitting loose and no longer held in the channel run
• Chafed or scuffed cable insulation where it contacts casing metalwork
• Broken or missing retaining clips, so the section will not seat properly
• The casing will not refit cleanly because the channel no longer aligns with its fixings

• Confirm the appliance model and serial number against the compatibility list before ordering.
• Check the channel currently fitted for the alternative number 85558053 to confirm it is the same section.
• Inspect cable insulation along the full run while the casing is open, and replace any damaged leads.