Ideal Cable Channel 1710 Long Right 171221

The Ideal 171221 is a long right-hand cable channel, listed by the manufacturer under the casing assembly group. It forms part of the casing and cable routing on Ideal Commercial appliances, guiding and retaining the wiring loom along the right-hand side of the unit so cables stay clear of hot surfaces and moving components.

This channel is the 1710 long right variant and carries the previous Ideal reference 85558052. It is used across the Ideal Commercial Viscount GTE range.

• The channel is cracked, snapped or has lost the section that holds the cable run in place
• Wiring has come loose from the channel and is sitting against the casing or heat source
• Visible chafing or scuffing on the cable insulation where it has rubbed against a broken channel edge
• The channel no longer clips or seats correctly on the casing, leaving the loom unsupported
• Distortion from heat exposure that prevents the cable run from sitting in its original position

• Check the previous Ideal number 85558052 against the part you are removing, as both references identify the same channel
• Confirm your appliance model against the compatibility list before ordering, as the long right channel is specific to the right-hand cable run
• Note the model and serial number from the appliance data badge so the correct casing variant can be matched
• Inspect the cable loom while the channel is off, as a damaged channel often accompanies chafed wiring