Ideal
Ideal Sealing Washer 32 x 44 x 2mm 171099
Ideal 171099 sealing washer, 32 x 44 x 2 mm, for Commercial Buccaneer GT and Concord appliances. Replaces 9501-3064.
At a glance
- Part type: gaskets, o-rings, seals and washers
£6.82
£5.68 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
This is an Ideal sealing washer measuring 32 mm outer diameter, 44 mm outer diameter across the flange face and 2 mm thick, supplied under part number 171099. It is a flat sealing component used to close the joint between mating faces on Ideal Commercial appliances, preventing water from escaping past the connection under normal operating pressure. The washer is listed against the Commercial Buccaneer GT combi and the Concord ES140/H and ES160/H ranges, where it forms part of the water-carrying assembly.
Signs this part needs replacing
- Water weeping or tracking from the joint the washer seals, visible as dampness or a drip when the appliance is running.
- Scale, rust or dark staining around the mating faces, indicating a long-standing slow leak.
- The washer feels hard, flattened or brittle when handled, rather than flexible and slightly resilient.
- A joint that continues to seep after being stripped and reassembled, suggesting the old washer has taken a permanent set.
- Crushed, split or deformed edges on the washer where it has been over-compressed during a previous repair.
Before you order
- Confirm the appliance model and, where available, the serial number against the compatibility list before ordering, as the same washer is used across several Commercial ranges.
- Check the previous number 9501-3064 against any documentation or old stock references to make sure this is the correct item.
- Inspect the mating faces for pitting, scoring or scale before fitting a new washer, as a damaged face will not seal reliably.
- Order any other seals or gaskets needed for the same joint at the same time so the appliance can be reassembled in one visit.
Mechanical
| Part type | Gaskets, o-rings, seals and washers |
|---|---|
| Dimensions | 32 x 44 x 2 mm |
Compliance
| Manufacturer part number (MPN) | 171099 |
|---|---|
| Commodity code | 4016 93 00 90 |
| Alternative numbers | 9501-3064 |
| Previous numbers | 9501-3064 |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| IDEAL COMMERCIAL BUCCANEER GT (COMBI VERSION) | — | — | — | |
| IDEAL COMMERCIAL CONCORD ES140/H CPT P/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ES140/H CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ES160/H CPT P/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ES160/H CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ES180/H CPT P/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ES180/H CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ES200/H CPT P/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ES200/H CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ES220/H CPT P/A | — | — | — |
Showing 10 of 18 compatible appliances.
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
IDEAL COMMERCIAL appliance manual — BUCCANEER GT (COMBI VERSION)
manualmanualIDEAL COMMERCIAL appliance manual — CONCORD ES140/H CPT P/A, CONCORD ES140/H CPT U/A, CONCORD ES160/H CPT P/A, CONCORD ES160/H CPT U/A, CONCORD ES180/H CPT P/A, CONCORD ES180/H CPT U/A, CONCORD ES200/H CPT P/A, CONCORD ES200/H CPT U/A, CONCORD ES220/H CPT P/A, CONCORD ES220/H CPT U/A
manualmanualIDEAL COMMERCIAL appliance manual — CONCORD ESi 140 CPT U/A, CONCORD ESi 160 CPT U/A, CONCORD ESi 180 CPT U/A, CONCORD ESi 200 CPT U/A, CONCORD ESi 220 CPT U/A
manualmanualIDEAL COMMERCIAL appliance manual — FALCON GTE (COMBI VERSION)
manualNo technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.