Ideal Wiring Duct LH 11 Section 170358

The Ideal 170358 is a left-hand wiring duct supplied as an 11-section casing assembly. It forms the moulded channel that carries and retains the boiler wiring loom, keeping conductors on a fixed route through the casing and away from hot surfaces and moving components. It is produced by Ideal and listed within the Ideal Commercial Boiler Spares range.

• The duct is cracked, split or broken along its length, so the loom is no longer enclosed.
• Wiring has come away from the channel and is no longer held on its intended route.
• Scuffing or chafing is visible on cable insulation where it has rubbed against the casing.
• The plastic shows heat discolouration, distortion or brittleness.
• The duct is loose or has detached from its mounting points on the casing.

• Match your appliance model and GC number against the compatibility list before ordering, as the same casing family covers several burner and gas train variants.
• If your documentation quotes 82298822 or 1177570, those numbers refer to this part.
• Inspect the wiring loom and any retaining clips while the casing is open, and replace anything that has been damaged alongside the duct.
• This is not a gas-carrying component.