Ideal Burner Door Guide 170144

The Ideal 170144 is a burner door guide that forms part of the burner assembly on Ideal Commercial Harrier appliances. It positions and supports the burner door so the door sits square against the combustion chamber face and the burner is held in its correct alignment. Manufactured by Ideal, it is a serviceable item within the burner assembly rather than a consumable seal.

• The burner door will not sit flat or square against the combustion chamber face
• Difficulty refitting the burner door after servicing, with the door catching or rocking on the guide
• Visible distortion, corrosion or wear on the guide where it locates the door
• Unstable flame pattern or combustion readings that drift out of tolerance after the burner door is refitted
• Signs of heat damage or cracking around the guide mounting points

• Check the appliance model and, where available, the GC number against the compatibility list before ordering
• Confirm the part number on the existing component matches 170144, and note the alternative and previous numbers listed below
• Inspect the burner door seal and gasket while the door is removed, as these are separate items
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.