Ideal Spark Generator Bracket CXI 139007

The Ideal 139007 is a spark generator bracket used on Ideal Commercial Concord CXDI appliances. It is the mounting bracket that carries the spark generator, holding the ignition unit in its correct position relative to the burner so the spark is delivered where it is needed during the ignition sequence. The bracket is listed under Ideal's brackets and clamps group and is supplied as a single replacement component.

• The boiler fails to ignite and locks out, with no spark at the burner despite a working spark generator.
• The spark generator is loose in its mounting and the spark jumps to the wrong point on the ignition assembly.
• Ignition is intermittent, with the appliance firing on some attempts and locking out on others.
• The bracket is cracked, distorted or corroded where it mounts to the combustion assembly.
• The generator cannot be set to the correct gap because the bracket no longer holds its position.

• Confirm the appliance model and serial number against the compatibility list, as the CXDI range covers several output sizes and variants.
• Check the existing bracket against part number 139007 and alternative number 1176702 before ordering.
• Inspect the spark generator, lead and electrode while the bracket is off the appliance, as ignition faults often involve more than one component.
• Work on the combustion assembly should be carried out by a competent engineer in line with the appliance manufacturer's instructions.