Ideal Wiring Harness Pilot Gas Valve 133066

The Ideal 133066 is a pilot gas valve wiring harness used on Ideal Commercial appliances in the Super Plus range. It carries the electrical link between the pilot assembly, the gas valve and the appliance control circuit, so the valve opens and closes in step with the ignition sequence. The harness is supplied by Ideal as a spare part for service and repair work.

• The pilot flame lights but the gas valve does not open
• Intermittent ignition or repeated lockouts during the start sequence
• Brittle, cracked or heat-damaged insulation along the harness leads
• Loose or corroded terminals where the harness plugs into the gas valve
• A continuity fault traced to an open or short circuit in the harness wiring

• Confirm the appliance model and GC number against the compatibility list before ordering.
• Check the harness currently fitted for the number 133066 or a matching connector layout.
• Inspect the pilot assembly and electrode leads at the same time, as damage to these parts often occurs together.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.