Altecnic
Altecnic 28mm Press-fit Red Lever Handle Ball Valve 124-8104
Altecnic 28mm press-fit ball valve with a red lever handle for isolating flow.
£88.48
£73.73 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Altecnic 28mm Press-fit Red Lever Handle Ball Valve is a quarter-turn isolation valve for pipework within the Altecnic ball valve range. It uses a press-fit connection at 28mm and a red lever handle for manual open/close operation. The valve is used to isolate flow on a section of pipework so that work can be carried out without draining the whole system.
Signs this part needs replacing
- The lever turns but flow is not shut off when the valve is closed
- Water weeping from the spindle or lever gland
- Visible leakage at the press-fit joint
- The lever is stiff, seized or fails to move through its full quarter turn
- Corrosion or scale around the valve body affecting operation
Before you order
- Confirm the pipework size is 28mm and that a press-fit connection is suitable for the installation
- Check the valve position and lever clearance, as the handle needs room to turn
- Verify the system pressure and temperature are within the valve's rated limits
- Confirm the correct press tool and jaws for 28mm press-fit fittings are available
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| ALTECNIC Ball Valves | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.