Altecnic
Altecnic Ball Valve 15mm x 1/2 Press-fit Butterfly Handle 124-8017
Altecnic 15mm x 1/2 press-fit ball valve with butterfly handle for isolating flow on heating and plumbing pipework.
£43.50
£36.25 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Altecnic 15mm x 1/2 Press-fit Butterfly Handle Ball Valve is a quarter-turn isolation valve with a press-fit connection at 15mm and a 1/2 threaded connection, operated by a butterfly handle. It is used to isolate flow on pipework serving heating and boiler installations. The ball valve body shuts off supply quickly for servicing, draining or component replacement.
Signs this part needs replacing
- The valve drips or weeps from the body or connection points when closed.
- The handle turns without resistance or fails to shut off flow fully.
- The handle is stiff, seized or will not move through the full quarter turn.
- Visible corrosion, scale build-up or cracking around the press-fit joint.
- Water continues to pass through the valve when the handle is in the closed position.
Before you order
- Confirm the pipework size is 15mm and the mating connection is 1/2.
- Check the valve is accessible for handle operation and that a butterfly handle suits the installation space.
- Verify the valve is intended for the pipework it will isolate before ordering.
- Confirm the press-fit tooling and jaws available are suitable for the joint being made.
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| ALTECNIC Ball Valves | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.