Altecnic
Altecnic Press-Fit Lever Handle Ball Valve 28mm
Altecnic 28mm press-fit ball valve with lever handle for isolating flow on heating and plumbing pipework.
£75.11
£62.59 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Altecnic 28mm Press-fit Lever Handle Ball Valve is a quarter-turn isolation valve for heating and plumbing systems. It uses a press-fit connection at both ends, so the joint is made with a press tool rather than solder or compression fittings. The lever handle gives a clear visual indication of the open or closed position.
Signs this part needs replacing
- Water weeping or dripping from the valve body, spindle or press joint
- The valve fails to isolate the flow when the handle is turned to the closed position
- The lever handle is stiff, seized or turns without moving the ball
- Visible corrosion or scale on the brass body
Before you order
- Confirm the pipework is 28mm and suitable for a press-fit joint
- Check that the press tool and jaw set you hold covers 28mm fittings
- Confirm there is enough clearance around the valve for the lever handle to swing through its full quarter turn
- Check whether the installation needs isolation on one side or both sides of the valve
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| ALTECNIC Ball Valves | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.