Ideal Gas Control Valve Tandem 240V 1/2 Inch 113057

The Ideal tandem gas control valve is a SIT-manufactured gas valve assembly used to regulate gas supply to the burner on a range of Ideal appliances. It operates on a 240V supply and uses a 1/2 inch connection, combining the main gas control and the tandem valve function in a single unit. The valve sits within the combustion and exhaust circuit of the appliance, controlling gas flow and modulation so the burner lights and runs at the correct rate.

• The burner fails to light or lights intermittently despite a call for heat
• The appliance locks out shortly after ignition or during the run cycle
• Flame control becomes erratic, with poor modulation or an unstable flame
• Gas is not held at the valve when the appliance is off
• Repeated lockouts that clear after a reset but return

• Confirm the appliance model and GC number against the compatibility list, as the same valve body is used across several Ideal variants
• Check the numbers on the existing valve against the alternative part numbers listed below before ordering
• Allow for any seals or gaskets disturbed during removal, as these are not supplied with the valve
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.