Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Hanicks
Basket
Vokera Main Wiring 105898

Vokera

Vokera Main Wiring 105898

Vokera main wiring harness, part 105898, for Condexa PRO 100M, 100S and 50M boilers.

At a glance

  • Part type: main wiring
  • Appliance family: Condexa PRO
  • Also known as 1530923
Manufacturer part no.
105898
Showing prices

£80.11

£66.76 ex. VAT · VAT at 20%

Available to order · 3 working days
Available to order · 3 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Vokera 105898 main wiring is the primary electrical harness used within the Condexa PRO range of gas boilers. It carries power and control signals between the boiler's main components and the control board. It is supplied as a Vokera service part for the Condexa PRO appliance family.

Signs this part needs replacing

  • The boiler fails to power up or shows no display despite a healthy supply.
  • Intermittent faults or random lockouts that trace back to the wiring loom.
  • Visible damage to the harness — chafed, burnt, melted or discoloured insulation.
  • Loose, corroded or heat-damaged connector terminals at either end of the loom.
  • Fault codes or component failures that persist after the individual components have been tested.

Before you order

  • Confirm the boiler model against the fitment list above, as the Condexa PRO variants use different looms.
  • Check the existing harness for damage and confirm the fault lies with the wiring rather than the control board or a connected component.
  • Note the connector layout and routing of the existing loom before removal so the new part is fitted correctly.
  • Isolate the electrical supply and follow the manufacturer's wiring diagram when fitting.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.