Ideal Flange Gasket Pack Super 4 250V 101127

The Ideal 101127 is a flange gasket pack intended for Ideal Super 4 250V commercial appliances. The gasket is fitted between the mating flange faces of the joint, where it compresses under load to form a watertight seal and stop fluid escaping from the assembly. It is supplied as a replacement part for the Super 4 250V range, and the pack format means the gasket can be renewed as part of a planned repair rather than reused once the joint has been broken.

Gaskets of this type are consumable items. Once compressed and heat-cycled they take a set, so a joint that has been opened should be resealed with a fresh gasket rather than the old one refitted.

• Water weeping or dripping from the flange joint during operation or after shutdown
• Staining, scale build-up or corrosion around the flange faces and adjacent pipework
• Gasket material hardened, flattened or brittle from prolonged heat cycling
• Visible cracks, splits or compression damage on the gasket face
• Repeated system pressure loss traced back to the flange joint

• Confirm the appliance model and, where shown, the GC number against the compatibility list below
• Check the flange faces are clean, flat and free from pitting or scoring before a new gasket is fitted
• Note the alternative part number 1779127 when cross-referencing older documentation or stock records
• Inspect any other seals in the same joint and renew them if they show the same signs of wear