Ideal Temperature Gauge 079833

The Ideal 079833 is a boiler temperature gauge supplied for Ideal Commercial appliances. It sits in the boiler casing and gives a direct visual readout of the water temperature inside the appliance, so an engineer or operator can see at a glance how the boiler is running. It is a display component rather than a control or safety device, and it is listed under Ideal Commercial boiler spares.

• The needle stays at zero or at its rest position while the boiler is clearly heating.
• The reading does not move in step with changes in flow or return temperature.
• The needle jumps or flickers erratically instead of settling on a steady value.
• Condensation or misting has formed behind the lens, obscuring the dial.
• The dial face, lens or bezel is cracked or physically damaged.

• Confirm the appliance model and, where available, the GC number against the compatibility list below.
• Check the part number on the existing gauge or the appliance documentation matches 079833.
• Note the alternative number 1175122 when cross-referencing older lists or supplier records.
• If the gauge is being replaced as part of a wider repair, check whether any seals or fixings disturbed during removal also need renewing.