Ideal Burner and Pump Switch Internal 079831

The Ideal 079831 is a combined burner and pump switch supplied as an internal component for Ideal Commercial appliances. It carries the switching duties for both the burner circuit and the pump circuit, so a single unit controls when the burner is called to fire and when the pump is run to circulate water around the system. The part is listed by the manufacturer under the description Burner Switch + Pump Switch - Int.

• The burner fails to fire when there is a call for heat, with no other fault indicated.
• The pump does not run on a demand, or runs continuously when it should be off.
• The appliance operates intermittently, cutting in and out without a clear pattern.
• The boiler locks out shortly after start-up or during a heating cycle.
• The switch feels loose, stiff or fails to change state cleanly when operated.

• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
• Confirm the appliance model and serial number against the compatibility list before ordering, as Ideal Commercial units vary in their switch arrangements.
• Check the existing switch against the part number 079831 and the description Burner Switch + Pump Switch - Int to confirm it is the correct item.
• Inspect any seals, gaskets or fixings disturbed during removal and replace them if they are worn or damaged.