Ideal Pressure Sensing Pipe Super 4 A V/H 079724

The Ideal 079724 is a pressure sensing pipe supplied for Ideal Commercial boiler appliances. It forms part of the pressure sensing circuit, carrying the pressure signal from the sensing point back to the control or pressure switch so the boiler can monitor and respond to system conditions. It is listed under the Hoses & Pipes part group and is used across the Concord Super Series 4 range in both horizontal and vertical configurations.

• Pressure readings that drift, fluctuate or fail to match a gauge reading at the boiler
• Pressure-related fault codes or lockouts appearing during firing or standby
• Erratic burner modulation or the boiler cutting out shortly after ignition
• Visible cracking, hardening, kinking or flattening along the pipe run
• Weeping or damp staining at the pipe connections or unions

• Confirm the appliance model and serial number against the compatibility list, as the pipe is specific to the Concord Super Series 4 horizontal and vertical variants
• Check the part number on the existing component or in the appliance manual before ordering; 1175056 is the alternative code for the same item
• Inspect the connection points and any seals or washers at the same time, as these are commonly disturbed when the pipe is removed