Baxi Pan Head Screw M4 x 6mm 062560

The Baxi 062560 is a zinc-plated M4 x 6 mm pan head screw with a Pozi drive, supplied by Baxi as a fixing for its boiler and appliance range. It is a thread-forming screw, so it cuts its own thread into the mating component as it is driven home rather than relying on a pre-tapped hole. Fixings of this type hold panels, brackets and internal assemblies in place, and are commonly disturbed during servicing and component replacement.

• The screw will not tighten and spins in the hole, indicating the thread-forming cut has stripped the surrounding material.
• The head is rounded or chewed, so the driver slips instead of turning the fixing.
• Visible corrosion or white/grey zinc breakdown on the shank or head, typical of a fixing exposed to condensate or damp.
• The fixing is missing after a service or repair, leaving a panel, bracket or cover loose.
• Rattle or movement from a cover or assembly that should be rigidly fixed.

• Confirm the GC number of the appliance against the compatibility list, as this screw is shared across a large number of Baxi models.
• Check the previous part numbers listed below against any documentation you hold, as older references may appear on legacy paperwork.
• Confirm the size and head type match the fixing being replaced, since M4 x 6 mm pan head Pozi screws are used in several positions on the same appliance.
• If the screw is being replaced as part of a repair that involves a gasket or seal, check whether that item is also required for the job.