Ideal Burner Assembly Bray AB 3000 058014

The Ideal 058014 is a burner assembly supplied by Ideal for its commercial heating appliances. It is listed under the Bray assembly designation AB 3000 and forms part of the burner and burner controls group within the appliance.

The assembly sits at the point of combustion, where the gas and air mixture is presented to the burner head. Its condition directly affects ignition, flame stability and the combustion readings an engineer records during servicing. Because it carries gas, it is a component that must be handled and fitted with the correct procedures in place.

• The appliance repeatedly locks out or fails to establish a stable flame at start-up.
• The flame is uneven, lifts off the burner head, or burns with an abnormal colour.
• Soot or carbon deposits build up around the burner head or in the combustion chamber.
• The burner body shows corrosion, cracking, distortion or heat damage.
• Combustion readings remain outside the expected range after the appliance has been set up correctly.

• Confirm the appliance model against the compatibility list, using the GC number or serial plate data where it is available.
• Compare the part number and burner assembly designation on the existing component with the details above before ordering.
• Inspect the burner seal or gasket face on the appliance during strip-down and replace it if it is damaged or compressed.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.