Ideal Module Fixing Stud M8 x 57mm 055998

The Ideal 055998 is an M8 x 57mm module fixing stud used to secure the module assembly on Ideal Commercial Concord Super Series appliances. It is a threaded stud supplied by Ideal for the Concord Super Series 1, 2 and 3 ranges in both horizontal and vertical configurations. The stud clamps the module joint so the mating faces remain aligned and sealed under operating conditions.

• Corrosion, pitting or rust staining on the stud threads
• Threads stripped, flattened or cross-threaded so the nut will not run freely
• Stud sheared, stretched or bent during removal or refitting
• Weeping or staining at the module joint where the stud provides the clamping load
• Nuts that will not hold torque or work loose again after tightening

• Check the appliance model and GC number on the rating plate against the compatibility list before ordering.
• Match the stud being replaced on thread size and length — M8 x 57mm — as similar studs are used elsewhere in the range.
• Inspect the module joint gasket or seal at the same time, as the joint has to be opened to renew the stud.
• Quote part number 055998 when ordering to avoid a mismatch with other Ideal fixing studs.