Reznor
Reznor Fan Motor 01 25632
Fan motor for Reznor warm air and room sealed heaters, supplied under Reznor part number 01 25632.
At a glance
- Also known as 2530282
£474.54
£395.45 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Reznor 01 25632 is a fan motor for Reznor warm air heaters and room sealed heaters. It drives the circulating fan that moves heated air through the appliance and into the space being served. The motor is identified by Reznor part number 01 25632, with the reference PO 5153 DE3G 6816K shown against the same item.
Signs this part needs replacing
- The fan motor fails to start, or the fan does not turn when the appliance calls for heat.
- Grinding, rumbling or squealing from the motor bearings during operation.
- The motor runs hot, trips on overload, or cuts out intermittently.
- Burning smells or visible scorching around the motor windings or casing.
- Reduced airflow through the appliance despite the fan appearing to run.
Before you order
- Confirm the appliance model against the fits list above before ordering.
- Check the part number on the existing motor, including the PO 5153 DE3G 6816K reference, to confirm it matches.
- Inspect the fan blades, mountings and wiring for damage that may have contributed to the motor failure.
Compliance
| Alternative numbers | UDSA0125632, 2530282 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| REZNOR LCSA20 WARM AIR UNIT HEATER | — | — | — | |
| REZNOR UDSA25 - ROOM SEALED HEATER | — | — | — | |
| REZNOR UDSA25-2 - ROOM SEALED HEATER | — | — | — | |
| REZNOR UDSA30 - ROOM SEALED HEATER | — | — | — | |
| REZNOR UDSA30-2 - ROOM SEALED HEATER | — | — | — | |
| REZNOR UPA30 - WARM AIR HEATER | — | — | — | |
| REZNOR V3 - UDSA25N - ROOM SEALED HEATER | — | — | — | |
| REZNOR V3 - UDSA30N - ROOM SEALED HEATER | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.