Ideal Hex Head Bolt M10 x 60mm Stainless 004718

The Ideal 004718 is an M10 x 60 mm hex head bolt manufactured in stainless steel. It is a threaded fixing supplied as a spare for Ideal Commercial appliances, where it is used to secure assembled components during installation, servicing and repair work. The bolt forms part of the Ideal Commercial spares range covering the Super Plus and related commercial boiler models.

• Visible corrosion, pitting or surface staining on the bolt shank or head, particularly where it passes through a casing or joint
• A rounded or chewed hex head that will not take a socket or spanner cleanly
• Damaged or flattened threads that bind when the bolt is run in by hand
• The bolt will not hold torque and backs out after the joint is tightened
• A joint that weeps or loosens repeatedly because the original fixing has stretched or lost its grip

• Check the appliance GC number and model against the compatibility list, as the same bolt size can be used in different positions across the range
• Confirm the thread size and length match the fixing being removed before ordering a replacement
• Check whether a washer, seal or gasket is fitted at the same joint, as these are separate items and may also need renewing
• Refer to the manufacturer's service instructions for the correct tightening sequence and torque figure for the joint being worked on