Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Ravenheat Circulation Pump Little Star LS 0009CIR09011/0

Ravenheat

Ravenheat Circulation Pump Little Star LS 0009CIR09011/0

At a glance

  • Part type: Circulation pump
  • Appliance family: Little Star LS
  • Also known as 5-METRE-PUMP---LS80LS100, RAVENHEAT0009CIR09011/0, 1840707
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
0009CIR09011/0
Showing prices

£140.41

£117.01 ex. VAT · VAT at 20%

Available to order · 3 working days
Available to order · 3 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Ravenheat circulation pump, part number 0009CIR09011/0, is the component that moves water around the primary circuit of the appliance. It is used across the Ravenheat Little Star LS family of gas boilers, where it maintains flow through the heat exchanger and on to the heating circuit and hot water side. The pump is supplied as a complete unit and is identified on the boiler by the part number stamped or labelled on the body.

Signs this part needs replacing

  • Boiler fires and runs, but radiators stay cold or heat unevenly
  • Pump body is noisy in operation, with humming, grinding or rumbling that does not clear after venting
  • Boiler repeatedly locks out or overheats when central heating is called for
  • Poor or intermittent domestic hot water performance on combi and heat-only variants
  • Water weeping from the pump body, flange or seal area

Before you order

  • Check the GC number and model shown on the boiler data badge against the compatibility list below before ordering.
  • Confirm the number on the existing pump matches 0009CIR09011/0 or the alternative number 1840707.
  • Inspect the pump flange and seals while the appliance is drained, and renew the gasket or sealing washers if they are disturbed.
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.