Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Ravenheat Pump 1 Inch BSP 0009CIR01011/0

Ravenheat

Ravenheat Pump 1 Inch BSP 0009CIR01011/0

At a glance

  • Part type: Pump
  • Also known as 1841158
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
0009CIR01011/0
Showing prices

£226.80

£189.00 ex. VAT · VAT at 20%

In stock
Cut-off passed — dispatches next working day
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Ravenheat 1 Inch BSP pump, part number 0009CIR01011/0, is a circulation pump used in Ravenheat gas boilers. It moves heated water from the appliance through the heating circuit and back again, so it sits at the centre of the boiler's ability to distribute heat around the system. This pump carries the 1 inch BSP connection and is listed against the CSI 85A and HE 85A families of Ravenheat appliances.

Signs this part needs replacing

  • Radiators stay cold or heat unevenly while the boiler is running and calling for heat.
  • The pump becomes noisy in use, with humming, grinding or rumbling audible from the casing.
  • The appliance overheats or locks out on an overheat condition because water is not being circulated.
  • Water weeps from the pump body, the connection or the seal area.
  • The pump body runs hot but there is little or no flow through the heating circuit.

Before you order

  • Check the appliance GC number and model against the compatibility list before ordering, as the same boiler range can use more than one pump variant.
  • Confirm the part number on the existing pump matches 0009CIR01011/0, and note that 0009CIR01011/1 is the previous number for this item.
  • Inspect the pump connection and any sealing washers or gaskets at the same time, and replace them if they are compressed or perished.
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.