
Riello
Riello Probe 3006707
Riello probe, part number 3006707, for GS5 burners and the R40 FS5 and GS5 range.
At a glance
- Also known as 3200843
£24.97
£20.81 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Riello 3006707 is a probe supplied for the Riello GS5 burner and the wider R40 burner family. It forms part of the burner's sensing circuit, feeding a signal back to the control box so that the burner can monitor and manage its operating sequence. It is listed within the oil boiler and burner spares range.
Signs this part needs replacing
- The burner repeatedly locks out or fails to complete its start sequence.
- Ignition is intermittent, with the burner running only after several reset attempts.
- Soot, carbon or oil deposits are visible on the probe tip.
- The probe body, insulation or lead shows cracking, chafing or heat damage.
- Fault-finding points to a weak or unstable signal from the burner sensing circuit.
Before you order
- Confirm the burner code and type on the rating plate against the fit list above.
- Check the existing probe and its lead routing for damage before removing it.
- Isolate the electrical supply and the oil supply before starting work.
- Have the burner's model and type details to hand when ordering.
Compliance
| Barcode / EAN | 4010009264170 |
|---|---|
| Alternative numbers | 3200843 |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| RIELLO BURNER SPARES | — | — | — | |
| RIELLO R40 FS5 - CODE 3756604 - TYPE 566-M | — | — | — | |
| RIELLO R40 FS5 - CODE 3756606 - TYPE 566-M | — | — | — | |
| RIELLO R40 FS5D - CODE 3758703 - TYPE 587-M | — | — | — | |
| RIELLO R40 FS5D - CODE 3758704 - TYPE 587-M | — | — | — | |
| RIELLO R40 FS5D - CODE 3758705 - TYPE 587-M | — | — | — | |
| RIELLO R40 GS 5 - CODE 3755219 - TYPE 552-T1 | — | — | — | |
| RIELLO R40 GS5 - CODE 3755216 - 3755217 - TYPE 552-T1 | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
