Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Reznor Pressure Switch HUBA 604.9 (S3) 30 60615 067

Reznor

Reznor Pressure Switch HUBA 604.9 (S3) 30 60615 067

Reznor pressure switch, HUBA 604.9 (S3), for the H30067 condensing unit heater.

At a glance

  • Part type: pressure switch
  • Also known as UDSA3060615067, 2530260
Manufacturer part no.
30 60615 067
Showing prices

£415.44

£346.20 ex. VAT · VAT at 20%

Available to order · 7 working days
Available to order · 7 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

This is the Reznor pressure switch HUBA 604.9 (S3), supplied under part number 30 60615 067. It is a pressure-sensing switch used on Reznor heating appliances to monitor air or flue pressure and prove that the appliance's fan and flue path are operating correctly before the burner is allowed to fire. The part is listed for the Reznor H30067 condensing unit heater.

Signs this part needs replacing

  • The appliance fails to fire or locks out while the fan is running normally.
  • Intermittent lockouts that clear on reset but return during the next demand for heat.
  • The burner fires briefly and then shuts down, indicating the pressure signal is not being proved.
  • Pressure switch contacts show no continuity change when the fan pressure is applied.
  • A flue or air pressure fault code is displayed by the appliance controls.

Before you order

  • Confirm the appliance model is the Reznor H30067 condensing unit heater.
  • Check the existing switch is marked HUBA 604.9 (S3) to match the specification.
  • Verify the condition of the sensing tubes and pressure connections before condemning the switch, as blockages or splits can produce the same fault.
  • Have the appliance model and serial details to hand when confirming the correct part number.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.