Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Ariston Pressure Sensor 0.8B 61310364

Ariston

Ariston Pressure Sensor 0.8B 61310364

Ariston 0.8B pressure sensor, part 61310364, superseding 51094, for Combi A 24 MFFI and A 30 MFFI boilers.

At a glance

  • Also known as 1573798, N8201
Manufacturer part no.
61310364
Showing prices

£32.12

£26.77 ex. VAT · VAT at 20%

Available to order · 3 working days (Heating Trade Supplies)
Available to order · 3 working days (Heating Trade Supplies)
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Ariston 0.8B pressure sensor (part number 61310364) is a hydraulic pressure sensing component used on Ariston Combi A series gas boilers. It monitors system water pressure and supplies that signal to the boiler's control board so the appliance can regulate firing and protect itself against low or excessive pressure. This part supersedes the earlier code 51094.

Signs this part needs replacing

  • Boiler fails to fire or locks out despite adequate system pressure at the gauge
  • Pressure reading on the boiler display or gauge is erratic, stuck or clearly inaccurate
  • Boiler cuts out intermittently during heating or hot water demand
  • Low pressure fault indicated even after the system has been correctly filled and vented
  • Water weeping from the sensor body or its connection to the hydraulic block

Before you order

  • Confirm your boiler model against the fit list above, including whether it is a pre- or post-April 2006 build
  • Check the part number on the existing sensor or the boiler's parts list, noting that 51094 is superseded by 61310364
  • Verify the system pressure at an independent gauge before condemning the sensor, as low pressure faults can have other causes
  • Check the sensor connection and wiring plug for corrosion or poor contact before replacement

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.