Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Ideal Wiring Harness Pilot Gas Valve 133066

Ideal

Ideal Wiring Harness Pilot Gas Valve 133066

Ideal 133066 pilot gas valve wiring harness for Ideal Commercial Super Plus appliances, linking the pilot assembly, gas valve and control circuit.

At a glance

  • Part type: Wiring harness
  • Appliance family: Ideal Commercial Super Plus
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
133066
Showing prices

£24.49

£20.41 ex. VAT · VAT at 20%

Available to order · 5-7 working days
Available to order · 5-7 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Ideal 133066 is a pilot gas valve wiring harness used on Ideal Commercial appliances in the Super Plus range. It carries the electrical link between the pilot assembly, the gas valve and the appliance control circuit, so the valve opens and closes in step with the ignition sequence. The harness is supplied by Ideal as a spare part for service and repair work.

Signs this part needs replacing

  • The pilot flame lights but the gas valve does not open
  • Intermittent ignition or repeated lockouts during the start sequence
  • Brittle, cracked or heat-damaged insulation along the harness leads
  • Loose or corroded terminals where the harness plugs into the gas valve
  • A continuity fault traced to an open or short circuit in the harness wiring

Before you order

  • Confirm the appliance model and GC number against the compatibility list before ordering.
  • Check the harness currently fitted for the number 133066 or a matching connector layout.
  • Inspect the pilot assembly and electrode leads at the same time, as damage to these parts often occurs together.
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.