Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Navien Vent Exhaust Packing 20029713A

Navien

Navien Vent Exhaust Packing 20029713A

Vent exhaust packing for Navien LCB 700 combi, regular and system boilers, part 20029713A.

At a glance

  • Appliance family: LCB 700
Manufacturer part no.
20029713A
Showing prices

£4.45

£3.71 ex. VAT · VAT at 20%

Available to order · 3 working days (HRP Trade)
Available to order · 3 working days (HRP Trade)
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Navien 20029713A is a vent exhaust packing used on LCB 700 series boilers. It forms the seal at the flue exhaust connection, closing the joint between the exhaust outlet and the flue path so that combustion products pass through the flue rather than escaping at the joint. It is a service item that is disturbed whenever the flue exhaust connection is opened.

Signs this part needs replacing

  • Visible staining, soot tracking or condensate marks around the flue exhaust joint
  • The packing is brittle, flattened, cracked or deformed when the joint is opened
  • Combustion readings drift or the analyser shows spillage at the exhaust connection
  • Draught or leakage felt at the flue exhaust joint while the boiler is running
  • The packing has been disturbed during flue service and will not reseat cleanly

Before you order

  • Confirm the boiler is an LCB 700 and note whether it is the internal or external variant
  • Check the output rating (21KW, 28KW or 36KW) and the appliance type (combi, regular or system)
  • Match the serial number on the data badge against the fitment list above
  • Check the flue exhaust joint for any other damaged seals or gaskets before reassembly

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.