
Baxi
Baxi O-Ring 18.3mm x 3.6mm 7812532
Baxi 7812532 O-ring, 18.3mm inner diameter x 3.6mm section, supplied in a pack of 10.
At a glance
- Also known as 1794950
£12.17
£10.14 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Baxi O-Ring 18.3mm x 3.6mm (part number 7812532) is an O-ring from Baxi, classed in the gaskets, O-rings, seals and washers category. It is listed for use across a range of Baxi combi, system and Amptec appliances.
Signs this part needs replacing
- Visible water weeping or a damp trace around a union or joint where the O-ring seats
- The O-ring is flattened, hardened, cracked or visibly deformed when the joint is opened
- Persistent pressure loss on the appliance with no other obvious cause
- A slight gas smell at a sealed joint on the appliance (isolate and check immediately)
- The O-ring is damaged or nicked during strip-down and cannot be reused
Before you order
- Check the GC number on the appliance data badge (for example 47-077-51, 47-077-53 or 47-077-74) against the fitment list above before ordering
Compliance
| Alternative numbers | 1794950 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| BAXI 424 COMBI 2 | 47-077-51 | 47-077-51 | — | — |
| BAXI 424 COMBI 2 LPG | 47-077-53 | 47-077-53 | — | — |
| BAXI 424 ERP COMBI 2.1 | 47-077-74 | 47-077-74 | — | — |
| BAXI 424 LPG COMBI 2 | 47-077-53 | 47-077-53 | — | — |
| BAXI 430 COMBI 2 | 47-077-52 | 47-077-52 | — | — |
| BAXI 430 COMBI 2 LPG | 47-077-54 | 47-077-54 | — | — |
| BAXI 430 ERP COMBI 2.1 | 47-077-75 | 47-077-75 | — | — |
| BAXI 430 LPG COMBI 2 | 47-077-54 | 47-077-54 | — | — |
| BAXI 436 ERP COMBI 2.1 | 47-077-76 | 47-077-76 | — | — |
| BAXI 615 SYSTEM 2 - FRONT FACING ANALOGUE PRESSURE GAUGE | 41-884-01 | 41-884-01 | — | — |
Showing 10 of 60 compatible appliances.
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
