Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Intergas NTC Heat Exchanger Sensor 230034

Intergas

Intergas NTC Heat Exchanger Sensor 230034

Intergas NTC heat exchanger sensor, part 230034, for Xclusive and Xtreme boilers.

At a glance

  • Also known as 2265491
Manufacturer part no.
230034
Showing prices

£53.10

£44.25 ex. VAT · VAT at 20%

Available to order · 7 working days
Available to order · 7 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

This is the Intergas NTC heat exchanger sensor, supplied under part number 230034. It is a temperature sensing component fitted to the heat exchanger on Intergas Xclusive and Xtreme condensing boilers, where it provides the boiler control with a resistance signal proportional to temperature. The control uses that signal to regulate firing and to monitor the heat exchanger for overheat and dry-fire conditions.

Signs this part needs replacing

  • Boiler locks out or shows a heat exchanger temperature related fault code that will not clear on reset
  • Erratic or implausible flow and return temperature readings on the boiler display
  • Boiler short cycling, with firing cutting in and out more frequently than normal
  • Overheat lockout during domestic hot water or heating demand
  • Resistance reading at the sensor that falls outside the expected NTC curve for the ambient temperature

Before you order

  • Confirm the boiler model and GC number against the fitment list above before ordering
  • Check the existing sensor plug and wiring for damage, as a poor connection can mimic sensor failure
  • Verify the fault with a resistance check across the sensor at a known temperature before replacing
  • Isolate the appliance and depressurise as required before removing the sensor from the heat exchanger

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.