
Vokera
Vokera Gas Diaphragm 10020265
Vokera gas diaphragm, part 10020265, for Mynute HE condensing boilers including 12HE, 15HE, 20HE and 20VHE models.
At a glance
- Part type: injectors
- Appliance family: Mynute HE condensing boilers
- Also known as 1532015
£13.56
£11.30 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Vokera Gas Diaphragm 10020265 is a gas-side component from Vokera, classed in the injectors part type. It is listed for use in the Vokera Mynute HE family of condensing boilers, against the NG injector assembly.
Signs this part needs replacing
- Burner pressure that will not hold steady or drifts from the commissioning figure
- Rough or unstable flame, with the boiler failing to modulate cleanly
- Delayed, weak or repeated ignition attempts
- Whistling or chattering from the gas valve during firing
- Visible hardening, cracking or perishing of the diaphragm material on inspection
Before you order
- Check the GC number on the data badge against the fitment list (GC: 41-094-54, 41-094-56, 41-094-57, 41-094-58, 41-094-59, 41-094-70)
Compliance
| Alternative numbers | 1532015 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| VOKERA MYNUTE 12HE | 41-094-54 | 41-094-54 | — | — |
| VOKERA MYNUTE 15HE | 41-094-56 | 41-094-56 | — | — |
| VOKERA MYNUTE 15HE LPG | 41-094-57 | 41-094-57 | — | — |
| VOKERA MYNUTE 20HE | 41-094-58 | 41-094-58 | — | — |
| VOKERA MYNUTE 20HE LPG | 41-094-59 | 41-094-59 | — | — |
| VOKERA MYNUTE 20VHE | 41-094-70 | 41-094-70 | — | — |
| VOKERA VOKERA MYNUTE 12HE | — | — | — | |
| VOKERA VOKERA MYNUTE 15HE | — | — | — | |
| VOKERA VOKERA MYNUTE 20HE | — | — | — | |
| VOKERA VOKERA MYNUTE 20VHE | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
