Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Glow-worm Limiter 16 Litre/Minute 0020070706

Glow-worm

Glow-worm Limiter 16 Litre/Minute 0020070706

Glow-worm 16 litre/minute flow limiter, part 0020070706, for Ultracom 24CXI, 30CXI and 38CXI boilers.

At a glance

  • Appliance family: Ultracom CXi
  • Also known as 1339982
Hanicks code
0020070706
Manufacturer part no.
0020070706

AvailabilityCall for price

Availability: no longer made. Call us and we'll check for stock.

No longer made: call us

The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.

01302 279234

Opening hours

Mon–Fri
7:30am–5pm
Sat
9am–12pm
Sun
Closed

Or request a price online

Tell us what you need and we will come back to you. No payment is taken.

Part: 0020070706 Glow-worm Limiter 16 Litre/Minute 0020070706

Whichever you would like us to reply to.

Helps us check the part fits.

30-day returns

Unused, in original packaging.

What it is

The Glow-worm 0020070706 is a flow limiter rated at 16 litres per minute, fitted within the domestic hot water circuit of the appliance. It restricts the volume of water passing through the DHW side of the boiler so the draw-off rate stays within the design figure for the unit. It is used on the Glow-worm Ultracom CXi range of gas boilers.

Signs this part needs replacing

  • Domestic hot water draw-off rate has risen noticeably above the appliance's rated figure.
  • Hot water flow is erratic or surges at the tap despite stable mains pressure.
  • The limiter is blocked or scaled, restricting hot water flow below the expected rate.
  • Visible damage, deformation or debris build-up on the limiter body when inspected.
  • Hot water temperature control becomes difficult because the flow rate through the boiler is inconsistent.

Before you order

  • Confirm the appliance model is an Ultracom 24CXI, 30CXI or 38CXI.
  • Check the existing limiter against the part number 0020070706 before ordering.
  • Confirm the rated flow figure marked on the existing component matches 16 litres per minute.
  • Verify the limiter is accessible and can be isolated before starting work.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.