Inventive Creations
Inventive Creations 1/2" Tap Mechanism Ceramic Disc Hot/Cold Pair CC18
A pair of 1/2" ceramic disc tap mechanisms for hot and cold tap bodies, supplied by Inventive Creations under part number CC18.
At a glance
- Also known as 1303006
£21.37
£17.81 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
A pair of 1/2" ceramic disc tap mechanisms from Inventive Creations, supplied as one hot and one cold cartridge. Each mechanism uses a ceramic disc valve to control flow and temperature at the tap head, replacing the worn valve internals inside a compatible 1/2" tap body.
Before you order
- Confirm the tap body accepts a 1/2" mechanism before ordering.
- Check the existing headwork type — ceramic disc mechanisms are not interchangeable with washer or jumper valve assemblies.
- Note the hot and cold handing so each mechanism is fitted to the correct side.
- Retain the original mechanism for comparison of spline, thread and body depth, as these are not stated here.
Compliance
| Alternative numbers | 1303006 |
|---|
No fitment data held for this part.
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.