Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Baxi Inner Flue Support Bracket 5109889

Baxi

Baxi Inner Flue Support Bracket 5109889

Inner flue support bracket for Baxi and Potterton combi boilers, part 5109889, GC number H02-523.

At a glance

  • Part type: Brackets and clamps
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
5109889
GC number
H02-523
Showing prices

£8.04

£6.70 ex. VAT · VAT at 20%

Available to order · 1-2 working days
Available to order · 1-2 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Baxi 5109889 is an inner flue support bracket used in Baxi and Potterton combi boilers. It holds and centralises the inner flue duct within the flue assembly, keeping the duct correctly positioned and supported through the appliance casing. The bracket sits within the Brackets, Clamps & Mountings group of spare parts.

Signs this part needs replacing

  • The inner flue duct moves or rattles when the appliance is running
  • The bracket shows corrosion, cracking or distortion
  • The flue duct no longer sits centrally within the flue assembly
  • A loose or missing flue support is noted during an annual service
  • Vibration is transmitted through the flue terminal or appliance casing

Before you order

  • Check the GC number and serial number on the appliance data badge against the compatibility list.
  • Confirm the appliance model matches one of the Baxi or Potterton combi variants listed.
  • Check whether a flue seal or gasket is required at the same time.
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.