Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Ideal Injector and Housing Kit LPG 176591

Ideal

Ideal Injector and Housing Kit LPG 176591

Ideal 176591 LPG injector and housing kit for Independent and Logic+ gas boilers, metering fuel into the burner for correct combustion.

At a glance

  • Part type: Injector and housing kit
  • Also known as 1782114
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
176591
Showing prices

£43.01

£35.84 ex. VAT · VAT at 20%

Available to order · 1-2 working days
Available to order · 1-2 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Ideal 176591 is an injector and housing kit intended for LPG-fuelled appliances in the Ideal range. The injector meters gas into the burner at a fixed rate, and the housing holds it in position on the manifold, so the two parts are supplied together as a matched assembly. It is used across the Independent and Logic+ families, where correct injector sizing is what keeps the gas rate and combustion readings within specification.

Signs this part needs replacing

  • Gas rate at the meter falls outside the figure quoted for the appliance, with no other cause found
  • Combustion readings drift rich or lean and cannot be corrected at the gas valve
  • Burner lights but the flame is unstable, lifts off the burner or burns with an uneven pattern
  • Sooting or discolouration around the burner and heat exchanger after a short period of running
  • Repeated ignition lockouts or flame supervision faults traced back to the injector area

Before you order

  • Confirm the appliance GC number against the compatibility list, as the same model name can be built to more than one specification
  • Check the existing injector marking and the appliance data badge to confirm the LPG variant before fitting
  • Note the alternative number 1782114 when cross-referencing against older documentation or stock records
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.