
Broag
Broag Injector 3.85MM 53943
Broag 3.85 mm pilot injector for GAS 450S commercial gas boilers, metering gas to the pilot burner.
At a glance
- Also known as 2201694
AvailabilityCall for price
Availability: no longer made. Call us and we'll check for stock.
No longer made: call us
The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.
01302 279234Opening hours
- Mon–Fri
- 7:30am–5pm
- Sat
- 9am–12pm
- Sun
- Closed
Or request a price online
Tell us what you need and we will come back to you. No payment is taken.
30-day returns
Unused, in original packaging.
What it is
The INJECTOR 3.85MM is a Broag pilot injector, part number 53943, used in the pilot burner assembly of Broag commercial gas boilers. It meters gas flow to the pilot burner, providing the stable flame that ignites the main burner. It is a serviceable component within the boiler's gas train and is replaced as part of pilot fault diagnosis and repair.
Signs this part needs replacing
- The pilot will not light, or lights and extinguishes shortly after ignition
- A weak, lazy or unstable pilot flame that fails to hold on the flame sensor
- Visible blockage, debris or corrosion in the injector orifice
- Repeated lockouts traced to pilot failure rather than the ignition electrode or gas valve
- Soot or discolouration around the pilot assembly indicating poor combustion at the pilot
Before you order
- Confirm the boiler model is Broag Commercial GAS 450S
- Check the existing injector marking to verify the 3.85 mm size is correct for the appliance
- Inspect the pilot assembly, ignition electrode, lead and flame sensor before replacing the injector alone
- Confirm the boiler gas type and any site-specific commissioning requirements before working on the gas train
Compliance
| Alternative numbers | 2201694 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| BROAG COMMERCIAL BROAG SPARE PARTS | — | — | — | |
| BROAG COMMERCIAL GAS 450S | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
