
Ravenheat
Ravenheat Ignition Control Board 0012GEN11010/0
Ravenheat ignition control board (120/230V) for Combistore and Combiplus LOW NOX boilers.
At a glance
- Part type: ignition control board / spark ignitor
- Also known as SPARK-GENERATOR-WH100130-120-230V, 1842341
£74.62
£62.18 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Ravenheat ignition control board is a 120/230V control module used in Ravenheat Combistore and Combiplus LOW NOX boiler ranges. It manages the ignition sequence, generating and controlling the spark that lights the burner. It is a serviceable control component within the appliance's ignition circuit.
Signs this part needs replacing
- No spark at the burner electrode when there is a call for heat
- Boiler attempts to fire but fails to ignite, then locks out
- Repeated lockouts shortly after reset, with no flame established
- Intermittent ignition — the boiler fires on some attempts but not others
- Visible heat damage, scorching or track failure on the board
Before you order
- Confirm the model and GC number against the appliance data badge
- Check the electrode, lead and earth path before condemning the board
- Verify the supply voltage and wiring connections match the original
- Note the part number printed on the existing board where legible
Compliance
| Alternative numbers | SPARK-GENERATOR-WH100130-120-230V, 1842341 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| RAVENHEAT 120 COMBISTORE (T) LOW NOX | 47-581-39 | 47-581-39 | — | — |
| RAVENHEAT 150 COMBISTORE (T) LOW NOX | 47-581-40 | 47-581-40 | — | — |
| RAVENHEAT CSI 120 T COMBIPLUS LOW NOX | — | — | — | |
| RAVENHEAT CSI 150 T COMBIPLUS LOW NOX | — | — | — | |
| RAVENHEAT RAVENHEAT 120 COMBISTORE (T) LOW NOX | — | — | — | |
| RAVENHEAT RAVENHEAT 150 COMBISTORE (T) LOW NOX | — | — | — | |
| RAVENHEAT RAVENHEAT CSI120 T COMBIPLUS LOW NOX | — | — | — | |
| RAVENHEAT RAVENHEAT CSI150 T COMBIPLUS LOW NOX | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
