Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Ideal Gasket DN100 PN6 Flange 177270

Ideal

Ideal Gasket DN100 PN6 Flange 177270

Ideal flange gasket, part 177270, sized DN100 with a PN6 pressure rating for Ideal Commercial appliances.

At a glance

  • Part type: Flange gasket
  • Also known as 1180477
Manufacturer part no.
177270
Showing prices

£49.63

£41.36 ex. VAT · VAT at 20%

Available to order · 5-7 working days
Available to order · 5-7 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

This is a flange gasket manufactured by Ideal, supplied under part number 177270. It is sized for DN100 pipework with a PN6 pressure rating, so it seats between mating flange faces on that nominal bore and pressure class to form a tight joint. It is listed for Ideal Commercial appliances.

Signs this part needs replacing

  • A visible weep or drip at the flange joint, especially once the system is up to temperature and pressure
  • Water staining, crusting or corrosion tracking around the flange faces
  • A gasket that has hardened, cracked or flattened across its sealing face
  • A gasket that has been disturbed or damaged during dismantling of the joint
  • Persistent seepage that returns shortly after the flange bolts are re-torqued

Before you order

  • Confirm the pipework is DN100 and the joint is rated PN6 before matching this gasket to the flange
  • Check the part number on the existing gasket or the appliance documentation against 177270
  • Verify your appliance against the compatibility list, as this gasket is listed for Ideal Commercial equipment only
  • Isolate and drain down the relevant section of the system before breaking the flange joint

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.