Gledhill
Gledhill Stainless Lite Plus Indirect 210Ltr Slimline EE Unvented Cylinder HRPPLUIN210SL
Gledhill Stainless Lite Plus indirect unvented cylinder with a 210 litre slimline capacity, heated by a separate boiler.
£1,024.57
£853.81 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Gledhill Stainless Lite Plus Indirect 210Ltr Slimline EE is an unvented hot water cylinder that stores 210 litres of mains-pressure hot water. It is heated indirectly, with a boiler supplying a coil inside the cylinder rather than a direct electric immersion as the primary heat source. The slimline profile suits installations where a standard-diameter cylinder will not fit.
Signs this part needs replacing
- Hot water running cold, or pressure at the hot taps dropping away
- Water discharging from the pressure relief valve or running through the tundish
- Weeping, staining or pinhole leaks on the cylinder body, unions or connections
- Repeated faults or lockouts traced to the cylinder thermostat or controls
- Poor hot water recovery, or the stored volume no longer meeting demand
Before you order
- Confirm the 210 litre capacity and slimline dimensions suit the available space and the household demand
- Check the boiler and existing system are compatible with an indirect unvented cylinder and its coil
- Verify incoming mains flow and pressure are adequate for an unvented supply, and that discharge pipework can meet the installation requirements
- Compare the connection positions, thermostat and controls layout against the cylinder being replaced
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| SPECIAL OFFERS Gledhill Boilermate | — | — | — | |
| SPECIAL OFFERS Gledhill Stainless Lite Plus | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.