Gledhill
Gledhill Stainless Lite Plus Indirect 150Ltr Unvented Cylinder
Gledhill Stainless Lite Plus indirect unvented hot water cylinder with a 150 litre nominal capacity.
£624.61
£520.51 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Gledhill Stainless Lite Plus Indirect 150Ltr Ee is an unvented hot water storage cylinder from the Gledhill Stainless Lite Plus range. It is an indirect model, meaning the stored water is heated through a coil connected to an external heat source such as a boiler rather than by an immersion heater alone. It forms part of a pressurised, unvented hot water system.
Signs this part needs replacing
- Water pooling at the base of the cylinder or dampness around the seams and tappings
- Corrosion, pitting or discoloured staining on the cylinder shell
- Reduced hot water volume or recovery, suggesting a scaled or failed internal coil
- Repeated discharge from the pressure relief valve or the cylinder losing pressure
- Rumbling, knocking or banging from the cylinder when the heat source runs
Before you order
- Confirm the existing cylinder is an indirect, unvented model and not a direct or vented unit
- Check that 150 litres matches the capacity required for the property and its hot water demand
- Verify the model appears in the fitment list above before ordering
- Measure the installation space and check pipework connections against the existing cylinder before removal
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| SPECIAL OFFERS Gledhill Boilermate | — | — | — | |
| SPECIAL OFFERS Gledhill Stainless Lite Plus | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.